Crazy Nice Patch Card

Very basic, I only used to colors on this one. Designer paper Sassy and WW. So if you are a beginner at this you can start with this one. Real easy to do. And the results are stunning. You can use these cards to give to a quilter or you can use this one for a Valentine's card.

Basic card is 5x5--Whisper White

Real Red cut at 4 3/4 x 4 3/4

Sassy Designer Paper (retired)

1 3/8 Punch

Real Red SU Marker

WW cut at 4 3/8

Punch out 6 squares with the 1 3/8 punch, cut 3 of those on the diagonal.

On your WW that is 4 3/8 start in the top corner.

See sample for placements of pieces.

Once done placing your pieces layer this on the Real Red piece that is 4 3/4 x 4 3/4. Then layer onto the 5 x 5 WW piece. And you card is finished.

Now how much easier can you get.

I will see if I can come up with another pattern tonight for tomorrows posting.

Angel Hugs

Blender Pen Refil Recipe

I found these in an email I got a long time ago and wanted to share them with you all.

2 teaspoons glycerin
4 teaspoons distilled water
1/4 teaspoon rubbing alcohol
It says you do not need to pull the blender tip out, just use an eye dropper.
This will go a long way so don't double it!

Stamp Cleaner Recipe

I found this recipe a while back:
2 Tablespoons glycerin (in the Rx dept.)
8 oz. distilled water
1 teaspoon baby wash
Hope this helps!

Sassy Churn Dash Quilt Block

Glad so many of you are liking the square quilt cards. They are so fun and easy to do. My aunt which is also my godmother gave me my first quilt when I was like 10 or 12 years old. I still have it but it is really getting ragged. I have quit using it and put it in a safe place to keep. So she is my inspiration on making these cards also. I have a few of her patterns and will someday dig out my sewing machine and make another quilt.

This block is called the Churn Dash, but has many other names too. This is one of the first quilts I made. Which at that time I cut all the pieces by hand. I didn't know about the short cuts and all the goodies you can use for quilting. But, have since got those goodies for my quilting and now do it the easy way.

Ok so to make this one you will need the following:

Whisper White, Real Red card stock

Sassy Designer Paper which is now retired.

1 3/8 Punch

Snail adhesive

WW card stock cut at 5 x 10" fold in half to get a 5x5 card.

Cut your RR at 4 3/4 x 4 3/4 for your background (border)

Punch out 3 RR squares with the 1 3/8 punch and 6 of the Sassy Designer Paper.

With 2 of the RR cut in half at an angle.

With 2 of the Sassy Designer Paper cut them in half at an angle.

Now the easiest way to do this is to lay out your pattern like in the sample card. Then you will glue and move the pieces one by one onto the RR background (border).

Start at 1/8 in and 1/8 down from the corner with your sassy designer paper, then do the RR, and go across.

2nd row do the same only it is all 1 3/8 squares.

3rd row do that same as the first.

Layer the RR on the WW and your done.

Now wasn't that an easy card to make?

Tomorrow I will have another one for you to make. It is called the Split Nine Patch. So have your punches and card stock ready.

Hope you enjoyed today's project and are joining me in making these. I would really love to see how yours looks. These cards would make a really nice gift for the quilter in your life to use.

Until tomorrow happy stamping or for this one piecing.

Angel Hugs

8 Pointed Star Quilt Block Card

I decided to make a quilt block card and had so much fun with it. I am also a quilter so doing a card this way was really fun. I am going to be making more in different designs. How many of you are quilters too?

On this sample I used the designer paper I had left over from yesterday's project. Very Vanilla Card stock and Mellow Moss and lastly Bravo Burgundy. Choc. Chip SU Marker.

You also need the 1 3/8 and 1 1/4 Punches

This card is 5x5 for the main card.

Punch out 5 Bravo Burgundy squares with the 1 3/8 punch

Punch out 2 Mellow Moss squares with the 1 1/4 punch, 3 of the designer paper with the same punch.

Layer one of the designer paper squares on the BB square. And do the same with 2 more. You will cut 2 of them on the diagonal.

Layer the MM on the BB on the remaining 2. Cut these in half on the diagonal also.

Layer these as shown in my sample.

Very Vanilla cut at 4 1/2 x 4 1/2.

1st Row: Now with one of your 2 pointed pieces mount that on the VV at 1 3/8 in from the top side.

2nd Row do the same only on the edge of the card stock. Then add your center piece and your other 2 pointed piece to that. See my sample for placement.

3rd row do the same as the 1st.

Cut MM at 4 3/4 x 4 3/4

Mount your VV Quilt Piece to the MM, being careful to get it even all around. Mount this to the BB main card.

With your Choc. Chip marker, add dashed lines for stitching on quilt pieces as show in the sample. I tried to do mine at about 1/8 inch.

And Walla you have a Quilt Card finished.

Hope you have enjoyed today's project and if you make one please share with me.

Angel Hugs

Old Fashion Lilac's

I am doing a sketch challenge from another blog Poetic Artistry . This is my card that I created for this challenge. I love how it turned out. I really love things that are old fashioned and this paper is old fashioned to me.

Designer Paper used is (retired) Recollections

Stamp Set used is Blossoms Abound, my good friend Susan gave me this set, Thank You Susan.

Card Stock is Very Vanilla, Mellow Moss, Bravo Burgundy and main card is Whisper White although you can't see it as it is covered with the designer paper.

Ink used is Bravo Burgundy, Old Olive

Choc. Chip Marker

Square Punches sizes 1 3/8, 1 1/4

I cut my designer paper to 4 1/4x 5 1/2 layered onto the White main card.

With the 1 3/8" Punch punch out 1 Burgundy pieces, with the 1 1/4 punch cut out 1 Mellow Moss pieces.

Layer these two pieces together Burgundy on bottom and Mellow Moss on top. Add stitching lines to the Mellow Moss with your Choc. Chip Marker.

With Burgundy cut a piece 2 3/4"x 2" and one cut at 2"x4".

With a small piece of designer paper cut 1 9/16 x 1 13/16

Layer this on the 2 3/4x 2 piece of Burgundy

Cut Very Vanilla Piece at 1 3/4 x 3 14/16. With Bravo Burgundy Ink pad and Blossoms Abound Lilac under piece stamp off once you have inked it then onto the Very Vanilla, this will give you a lighter color on the under part of the Lilac, next take the top part of the Lilac and stamp over the top of your lower part of your Lilac. This give it that two toned effect.

With Old Olive and the Leaf Vein stamp, stamp on Very Vanilla at the top part of the Lilac. Then take the leaves and stamp off once before adding to your leaf vein. Again the two toned effect. Layer this piece on the Bravo Burgundy.

Now grab the main card with the designer paper on it and take the Punched Out Square and Cut in half, this will give you both sides. Layer this one your card centered both ways from the side and top and bottom. Layer the 2 3/4x2 piece with the designer paper over that so that the points on the squares stick out from underneath. Then the piece you just stamped with the Lilac on it layer this over the top of your piece you just put down. I used pop dots for this piece so it stood out more. And that is it your card is done.

Here is the sketch for you to make one yourself. I hope you join Julee and I and make one also. Please share when you do.

Angel Hugs

How to set evenly spaced eyelets

Embossing with your Crop-a-dile

I seen this on Paper Pleasings Blog and had to share. What a wonderful idea. I love this tool, my son got it for me for my Birthday last year and I use it all the time. Now I must try this out.

Gentle thoughts of you

Another sketch challenge card. You know you all can join in on the sketch challenge. I would really love to see what you do. Just leave a comment here with this posting and leave link to you card, be it on your blog or on SCS.

Ok with that said, here is my card. Anyone remember the set Garden Collage? I just love that set so spring time to me. So I pick that set to work with for this sketch.

Garden Collage

Bashful Blue, Pixie Pink, Night of Navy, Whisper White Card stock

Black Ink Pad

Versamark Pad

2 Scalloped Punches

Rose and Night of Navy Ribbon

First off I stamped my background of the Soft Swirls ( retired ) in Versamark on the Bashful Blue main card.

Cut y our Pixie Pink card stock 5x3 and stamp with versamark. I used a retired stamp set for this too. It has little butterflies and dots on it. Don't remember the name.

Stamped my image of the bird on Whisper White card stock, punched out. Colored in with chalks. Shaded a little darker on the edges with the chalk to make it stand out more.

Punched out another scalloped circle slightly larger in Night of Navy card stock. With my white gel pen I put dots around the edges in each scallop.

Mounted the bird piece to the Night of Navy.

Mount the Pixie Pink onto the Bashful Blue. Add your ribbon. I used two colors and layered them one upon the other. Then mounted the Scalloped pieces to the card.

Stamped my verse "Gentle thoughts of you."

We had such a beautiful day in MN today. We was close to 40 degree's which for this time of year is not normal. But, we enjoyed having it. I made it to the post office to mail out a PIF ( Pay it forward ).

My ears are feeling better today so thought I would stamp tonight. I hope I got it in, in time for it to come to your mail boxes tomorrow.

Angel Hugs

Make your own Rub-Ons

I have been sick with fluid in my ears and it is tilting my ear drums forward. So have not done much stamping or anything. Was looking through my email though and found this so thought I would share it with everyone. I know I would really love to try this but it will have to be when I feel better. If you try it please put a review in the comments area, I would love to hear how it went for you.


MAKE YOUR OWN RUB-ON

This technique is just too cool! Rub-ons are all the rage these days, but you may find it difficult to locate the perfect theme, color, etc. for your project. Well, now you can custom make your own!
Supplies you will need:
Transparency sheet or a piece of page protector, cut to fit your printer. (Most will be 8.5 x 11)Popsicle stick (or similar object to rub the ink)Computer and Word Processing Program Printer
1) Open your Word Processing Program, and type the words you want to use for your rub-ons. Choose your favorite font, color, size etc. You can even add a graphic if you like!
2) Choose "Print". Click on "properties" and choose the following: "Best Quality" (you want as much ink as possible on the transparency) "Mirror" or "Word Flip" (this will flip your text so that it's backwards.
3) Now print. If you're using a transparency, be sure and print on the slick side, not the rough side. If you're using page protector, either side is fine.
4) After it prints, set it aside to dry for 15 minutes. Don't touch it, it will smudge!
5) Choose the paper/project you want to use. Place the transparency, ink side down on the paper. Using the Popsicle stick, rub firmly across all the letters. Lift it up and voila! Your text is on your project!

Angel Hugs